Log Splitter parts hydraulic pumps valves cylinders
Log splitter accessories, hydraulic two stage pumps pto tractor pumps cylinders valves

 

    P & J Commercial Products Home of SPLITez  log splitters.

  We sell complete kits for building your own wood splitter  Honda Engines with pumps 

Scroll down there a lot to look at.        

 

Logsplitter  Pumps 2 stage

Logsplitter Hydraulic cylinders  

PTO Hydraulic pumps only  $289.00  4 different models

Prince Valves , D tent , Auto cycle , Control valves

Engines and pump kits

Hydraulic Reservoirs click hear

                                         

                                               hydraulic resevior tank


 

  SUPER BUY

Log Splitter Valve (Brand New) 3/4" Work Port
 
 
Detent valve
 
  EZ  LSV-2      3/4" Inlet & Outlet  With  3/4"  working ports              $ 60.00
 
  EZ  LSV-1      3/4" Inlet & Outlet  With  1/2" working ports               $ 60.00
 
                                                                                            10 or more $ 49.99 each mix or match
 
  We also carry prince valves listed below
 
 

  

 

 pto tractor pump

      Self adjusting wear plates both sides - Roller bearings - Internal spline with thru-drive feature - High tensile cast iron end plates - Slips on tractor PTO- Two out let ports with plug to seal unused port.

 All pumps - Max RPM 540 - Max 2250 psi - Port in 16 SAE - Out 12 SAE -  Shaft 1 3/8" Dia 6 Tooth     

 

PART #

DISPL

INPUT HP

GPM at 2000 PSI

WEIGHT

PRICE

EZ-1567

3.6

8.8

7.2

33#

$289.00

EZ-1557

5.7

13.8

11.6

36#

$289.00

EZ-1555

7.8

20.4

16.9

38#

$289.00

EZ-1560

9.9

21.8

21.0

40#$325.00

 

EZ 1567-1557-1555 3 or more mix and match $ 260.00 each.


 

 16 gallon per min two stage log splitter pump                       Special Buy

   2 Stage  3000 PSI. log splitter pump 1"  Tube  Inlet 1/2" NPT outlet with 1/2" shaft 4 bolt  face 

  NO.250

     EZ-1092      2 - Stage  11  GPM.  Pump          Price   $ 106.00  + 3 or more  $   99.00 each  ( Min. 5 Hp Engine )

 

        EZ-1093      2 - Stage  13  GPM.  Pump         Price   $ 112.00  + 3 or more  $ 105.00 each ( Min. 6.5 Hp Engine )

     EZ-1094      2 - Stage  16  GPM.  Pump         Price   $ 119.00   + or more  $ 109.00 each (Min 8 Hp Engine )

 

Mix & Match Save $ on Three or more


 

Haldex  two stage log splitter pump 16 gallon per min.

         Haldex  Barnes  2 - Stage pump 1" Tube inlet 1/2" NTP Outlet

NO.250

EZ-1011    2- Stage Pump   11 GPM.                 $139.00 ( Min 5 Hp )

EZ-1014     2- Stage Pump   13 GPM                  $159.00 ( Min. 6.5 Hp )

EZ-1012     2- Stage Pump   16 GPM                  $168.00  ( Min. 8 Hp )  

 

       2 Stage pumps

Haldex Barnes Hydraulic log splitter pump 2 stage 22 gallon per min.

      Haldex Barnes 22 gallon per min  pump  1" NTP Inlet 3/4" outlet -     

  22- GPM  2 stage   250       $310.00  + 2 or more $ 299.00    ( 12 Hp engine )

Part NO.       EZ-1022


 Barnes two stage log splitter pump 28 gallon per min.

   Haldex Barnes  28 gallon per min pump   1" inlet 3/4" outlet-

 28-GPM   2 stage pump    250          $395.00   + 2 or more  

$ 379.00  ( Min. 16 Hp engine )

Part NO.     EZ-1028


 300 psi hydraulic cylinder import log splitter 2" shaft 20 ton

3000 psi Tie Rod     20 Ton   4"X 24"X 2" Shaft

EZ-4024 T-2            Price   $197.00

 

Bore Stroke Closed Pin Center Distance Shaft Diameter Port Size  Clevis Pin Diameter Weight (lbs)
Retracted Extended
4" 24" 34.25" 58.25" 2" 1/2" NPTF 1" 70

 


 tir rod cylinder       Tie rod 3000 PSI Hydraulic Cylinder 4" Bore X 30" Stroke

EZ-4030T-2        3000 PSI  4" X 30" X  2" Shaft                                                                  Price       $210.00 

 Port size 1/2" NPTF                                                           Shipping  Lower 48         Wt. 70 Lbs        $ 70.00

 

 


 

4x242 inch shaft 3000 psi hydraulic cylinder

  Pin size 1" - 3000 psi welded    20 Ton  4" x 24" x 2" Shaft

NO.286-065

EZ-1065   SALE  PRICE         $259.00    Ship Wt  61 Lbs.

 
Bore Stroke Closed Pin Center Distance Shaft Diameter Port Size  Weight (lbs)
Retracted Extended
4" 24" 34.25" 58.25" 2" SAE 8#

 
61 

 


 

 4 x 24 x 2" Shaft Tie rod hydraulic cylinder4"x 24" x 2" Shaft  20 Ton

 Pin Size 1" - 3000 PSI Tie Rod      

NO.214-428

EZ-1405    Sale  Price     $235.00   Ship Wt. 79 Lbs.

Bore Stroke Closed Pin Center Distance Shaft Diameter Port Size  Weight (lbs)
Retracted Extended
4" 24" 34.25" 58.25" 2" SAE 8#

 

79


 5 x 24 x 2.250 Shaft Tie rod hydraulic  cylinder 3000 psi      


BIG SHAFT 24" STROKE

  Pin Size 1 1/4 " 3000 psi Tie Rod        30 Ton      5"x 24" x  2.250" Shaft

 NO.214-428

 EZ-1428    Sale Price       $325.00      Ship Wt 127 Lbs.

 

Bore Stroke Closed Pin Center Distance Shaft Diameter Port Size  Weight (lbs)
Retracted Extended
5" 24" 36.25" 60.25" 2.250" SAE 12#

 
127 

 

     

 


 5 x 24 x 2.250 Shaft Tie rod hydraulic  cylinder 3000 psi      


BIG SHAFT 30" STROKE

  Pin Size 1 1/4 " 3000 psi Tie Rod        30 Ton      5"x 30" x  2.250" Shaft

 NO.214-430

 EZ-1430    Sale Price       $ 395.00      Ship Wt 145 Lbs.

 

Bore Stroke Closed Pin Center Distance Shaft Diameter Port Size  Weight (lbs)
Retracted Extended
5" 24" 42.25" 72.25" 2.250" SAE 12#

 
145 

 

 


 

 Tie rod hydraulic cylinder Prince 41/2" X 24" X 2" Shaft U.S.A  

      Prince hydraulic cylinders  3000 psi Made in the U.S.A

Tie rod cylinder  4 1/2" X 24" 2" Shaft       1 1/4 " pin hole  

     PMC- 45242   

Our price $359.00  Prince Tie Rod    8 or more $ 330.00 each

 

Bore Stroke Closed Pin Center Distance Shaft Diameter Port Size  Weight (lbs)
Retracted Extended
4-1/2" 24" 36.25" 60.25" 2" SAE 10#

 
90 

 


 

 Tie rod hydraulic cylinder Prince 5" X 24" X 2" Shaft U.S.A Only $ 349.00 sale ends soon USA made

 

 MFG. Part No. B500240ACDDAO7B

         PMC- 50242             

Our price $349.00   5" x 24" X 2" Shaft  Prince Tie Rod

                    8 or more $336.00

Bore Stroke Closed Pin Center Distance Shaft Diameter Port Size  Weight (lbs)
Retracted Extended
5" 24" 36.25" 60.25" 2" SAE 10#

 
113 

 


Tie rod cylinder Prince 41/2" X 24" X 2" Shaft U.S.A   Only $ 420.00 Sale ends soon Made in USA 30 ton

  MFG. Part No. B500300ACDDAO7B

         PMC- 50242  Cylinder  3000 Psi painted yellow         

Our price $420.00   5" x 30" X 2" Shaft  Prince Tie Rod

8 or more $ 389.00 each

Bore Stroke Closed Pin Center Distance Shaft Diameter Port Size  Weight (lbs)
Retracted Extended
5" 30" 42.25" 72.25" 2" SAE 10#

 
129 

 

 

 

 

 


 

               Welded  Hydraulic Cylinder 5" X 24" cross tube 21/2" Shaft Prince Gladiator  U.S.A 

     

MFG. Part No.  

  PMC 21024  Prince  Gladiator cross tube 3000 psi  1-1/2"  pin holes              

Our Price  $559.00    5" Bore 24" Stroke 2 1/2" Shaft    

                      8 or more $ 499.00 

Bore Stroke Closed Pin Center Distance Shaft Diameter Port Size  Weight (lbs)
Retracted Extended
5" 24" 35" 59" 2.500" NPTF 3/4"

 
115 

 

 


  Welded  Hydraulic Cylinder 5" X 30" cross tube 21/2" Shaft Prince Gladiator  U.S.A PMC 21030 Prince Gladiator cross tube 3000  psi        

 

Our Price  $639.00    5" Bore 30" Stroke 2 1/2" Shaft 

                      8 or more $ 559.00

 

Bore Stroke Closed Pin Center Distance Shaft Diameter Port Size  Weight (lbs)
Retracted Extended
5" 30" 41" 71" 2.500" 3/4" NTPF

 
130 

 

 


 Welded  Hydraulic Cylinder 5" X 36' cross tube 21/2" Shaft Prince Gladiator  U.S.A       

  PMC 21036  Prince Gladiator cross tube 3000 psi      

 Now  $679.00    5" Bore 36" Stroke  2 1/2" Shaft 

              8 or more $ 585.00

Bore Stroke Closed Pin Center Distance Shaft Diameter Port Size  Weight (lbs)
Retracted Extended
5" 36" 47" 83" 2.500" 3/4" NPTF

 
145 

 


 

Welded  Hydraulic Cylinder 6" X 24' cross tube 3" Shaft Prince Gladiator  U.S.A 

   

  PMC 22024  Prince Gladiator Cross Tube 3000 psi     

 Now  $719.00    Bore 6" Stroke 24"  Shaft 3"  42 Ton

                   8 or more $ 647.00

 

Bore Stroke Closed Pin Center Distance Shaft Diameter Port Size  Weight (lbs)
Retracted Extended
6" 24" 35" 59" 3" 3/4"  NTPF

 
150


 LS3000 2 Valve U.S.A 3/4"  in, out and working ports log splitter valve  

               Prince Log splitter D-Tent valve  Made in the U.S.A

         3/4" in and out  with 3/4" working ports they are the large out let ports not the 1/2" ports  25 G.PM 2750 P.S.I  

  LS-3000-2  

                 Our price  $ 89.00  

                                                10 or more $ 77.00 each

 


 

 Prince LSR-3060-3  Rapid Extend wood splitter valve.
Fast cycle time from a small single stage pump
Pressure release detent on retract
 
LS3000 2 Valve U.S.A 3/4"  in, out and working ports log splitter valve Prince
 
   
The Prince LSR-3060-3 Log Splitter valve has a fast   ( RAPID EXTEND HIGH SPEED MODE FOR LOG SPLITTERS )

Has average of 50% reduction in amount of time it takes to get a fully retracted cylinder
 
extended.  Built to reduce system cost by working with a less expensive single stage
 
pump. When splitting wood and the need for that extra splitting  force , the LSR -3060-3
 
will allow the user to manually shift from high speed mode to high splitting force  mode.
 
Advantage of the LSR eliminates the need for a Hi-Lo  pump, reduces the overall cost of building  a typical wood splitter.

Extend flows of up to 25 GPM with inlet flow of only 4 GPM.
 
NOT FOR USE WITH TWO STAGE PUMPS  HI-Lo
 
3/4" in 3/4" outlet ports    1/2" working ports 
 
 
LSR -3060-3  Price $ 87.95
 

 


 

 RD5100 Valve

 

     Part  No.     RD512CA5A4B1 30 G.PM  3000 P.S.I  

1- Spool  4W / 3P Tandem spring center 1/2 Working ports  

 Our price $127.00

                       8 or more $ 110.00 each


 


RD5200 Valve       Prince Control Valve- RD522CCAA5A4B1

2 Spool Valve- 25 GPM -4- way/3-pos-spring center both spools

Great valve for log lift and 4-way wedge

 3/4" in and 3/4"out ports

 1/2" working ports

 Shipping weight 23 LBS

 Our  Price   $ 193.00

                                     8 or more $ 180.00 each

    

 


 

 RD5200 Valve  

Prince  Auto cycle valve

RD523MMEE5A4B1

     This valve is used to automatically cycle a hydraulic cylinder-out, back, stop-. When both handles are pulled back the cylinder will extend out. When it reaches full extension, the first spool will go into neutral and begin retracting.  When ram makes  full retraction, the second spool will kit out and the cycle is complete .  To start the next cycle pull both handles back 

 

This Auto Cycle Valve is convertible to a power beyond with  a optional conversion plug

  • G.P.M        25

  • WT.           23 lbs

 Our Price $ 294.00  

                       8 or more $ 270.00 each


 


 

RD5200 Valve 
 
 
          Prince  Control Valve RD522ECAA5A4B1

      4 Way 3 Position open center motor spool valve 

      Power beyond valve
 
    This valve can be used to control a bi-rotational motor or a double acting cylinder. In  neutral the work ports are open to the return. This allows a cylinder to drift or a motor to  coast to a stop. In neutral the oil goes through the open center passages to the next spool  of multi-spool valve
 
3/4" in 3/4' out  1/2" working ports
 
Price    $192.49
 
                     8 or more  $ 160.40 each

 


 

RD5200 Valve

 

 

 Prince  Two spool Valve

RD523MMEE5A1A1

 Not a Power beyond valve Down stream valve.

Auto Cycle valve 

 

Price $ 269.00

                8 or more $ 240.00

 

 

Shipping $19.00 Lower 48 States


 

 

 

    Hydraulic return line filter with head large 

           1-1/4" in and out ports comes with filter & head  

    FWH70G  $39.00  +  8 or more save  $ 32.49 each

25 or more $29.09 each

            Replacement filiter

    F70G    $18.95  

  

 

 

 


Lens Hydraulic Filter 1-1/4 " Inlet 1-1/4 Outlet

$120.00

 


           suction strainer  for pumps up to 25 g.pm 2" N.P.T  1 1/4" Outlet

         In tank suction strainer metal Externally Mounted

   2" male  to 1-1/4"  female pipe for pumps up to 25 gallon per min

      SS225       $22.00 

 


 

         Spindles 3500 lbs  1 1/4 Inch square end $19.00 each   

 

 

1/ 1/2" square 3500 lbs spindles

 


 

    Hubs for spindles 5 ON 4 1/2"  3500 Pound with bearings lug nuts caps

              3500 HUB 5 BOLT

 

3500 lbs Hubs  price/ each $48..00 

 


 

        Tires and rims  Made in the U.S.A 

          530 x 12 approx 21.5" tall  5 lug on 4 1/2" 

    load range  c $ 48.00 each

 

 

 


 

      *Also have combinations for  5 1/2 hp with 11 gpm,  6 1/2  hp with 13 gpm  and 9 hp with 16 gpm pumps.   click here 

 

            Save on Splitez Log Splitter kits 

   Engine, pump, coupling, adapter, valve, filter and hydraulic cylinder

 

Pump to engine

 LS3000 2 Valve U.S.A 3/4"  in, out and working ports log splitter valve

 

Log splitter pump 2 stage 22 gal per min Barnes hydraulic pump

 Tie rod hydraulic cylinder Prince 5" X 24" X 2" Shaft U.S.A

Honda gas engine GX 390

  

 

 

 

   

 1 -  Honda Engine

           G X Series 389

 2 -  Haldex/Barnes Two stage High/low pump  MADE IN U.S.A

             Inlet port           Outlet port         Gallons per min.

                   1"                     3/4"                        22

 3 -  Pump to engine bracket

 4Engine to pump couplings Made by Magnaloy  

 5Prince Tie Rod Royal Plate Hydraulic Cylinder 3000 psi  MADE IN U.SA

    Bore    Stroke      Rod Dia      Pin Dia                   

      5"         24"           2"              1-1/4"                         

 6 - Prince D-Tent valve  LS 3000-2  MADE IN U.S.A Inlet & outlet ports  3/4"  Working Ports   3/4 "

 7 - Return filter 

       In & outlet ports -1 1/4"             

       Flow up to 70 G.P.M

 8 - Same parts as we use on our Model 15000  34 ton log splitter one low price

       LSPKIT-     $1498.00

 


 

   Options for 15000 kit  Add price to kit  $1498.00  plus

 

1 -  Electrical Start Honda engine 389 cm3 

  Add  $195.00

 Welded  Hydraulic Cylinder 5" X 24" cross tube 21/2" Shaft Prince Gladiator  U.S.A 

  2 - Prince hydraulic cylinder   Gladiator 3000 PSI    MADE IN U.S.A 

Stroke      Bore    Rod Dia.        Retract       Port             Pin

 24"            5"         2-1/2"            35"         3/4" NPT       1 1/2" 

        This cylinder is used on our Splitez   25000 model  

                 A - 24" Stroke Gladiator 

                        Option  Add  $299.00

 

 

                          B- 30" stroke Gladiator

                          Option  Add  $359.00

 

 

               C - 36" stroke  Gladiator

                        Option  Add  $410.00

 


 

   3 - 15000 Wedge with top block  1 1/4"  pin hole.  Wedge fits 8"

I beam as used on our 15000 Model   Bolts and Guide plates 

                        Option  Add    $325.00

 


 

   4 - 25000  Wedge with two top blocks 1-1/2" pin hole. Wedge

fits  8" I beam as used on our 25000 model Bolts and guide plates

and two 1 1/2" pin

                      Option Add  $345.00

 


 

  

                               

                            P & J Commercial Products 


 E-mail: penjames@juno.com 

               1-661-248-5270   Phone  

 Toll Free 1-877-SPLITez

               1-877-775-4839 

                              

                                         Prince hydraulic cylinders

 

 

 


 

 

 

 

   Special buy  out off stock

3000 psi weled hydraulic cylinder 4 X 24 X 2"    1" pins    

  Hydraulic welded cylinder 3000 psi.

20 Ton  4" x 24"x 2" shaft   Nice log splitter cylinder  

   EZ-4024CW         out of stock                 Ship  Wt. 75 Lbs

Bore Stroke Closed Pin Center Distance Shaft Diameter Port Size  Weight
Retracted Extended
4" 24" 34.25" 58.25" 2" SAE 8#

 
68 

 


 

4 X 24 X 2 inch shaft weled 3000 psi hydraulic cylinder

 

      3000 psi cross tube welded hydraulic cylinder

20 Ton  4" X 24" X 2" Shaft  SAE NO 8  working ports   

    EZ- 4024BW    out of stock

  

Bore Stroke Closed Pin Center Distance Shaft Diameter Port Size  Weight (lbs)
Retracted Extended
4" 24" 35" 59" 2" SAE 8#

 
70